SHIJIAZHUANG TOPSTAR INTERNATIONAL TRADING CO., LTD.
Shijiazhuang Topstar
International Trading Co., Ltd.
Get In Touch
welded wire mesh machine factory

How to Choose a Welded Wire Mesh Machine Supplier for Your Mesh Sizes

How to Choose a Welded Wire Mesh Machine Supplier for Your Mesh Sizes

A welded wire mesh machine supplier should match your wire diameter, opening range, welding width, material, and production method. Our industrial CNC machine handles 2.8mm - 8.0mm wire, 25mm - 300mm weft spacing, 50mm - 300mm warp spacing, and 2000mm - 2500mm welding width. Use these points to check whether the configuration fits construction mesh, fencing, aquaculture, or other industrial orders.

Illustration: How to Choose a Welded Wire Mesh Machine Supplier for Your Mesh Sizes
Illustration for reference; see the product page for actual photos and specifications.

2.8mm - 8.0mm

Wire diameter

25mm - 300mm

Weft spacing

50mm - 300mm

Warp spacing

2000mm - 2500mm

Welding width

1

Start with the mesh range you need

The first purchasing check is whether the machine can make your regular mesh openings without forcing the line outside its working range. Our industrial welded mesh machine supports weft spacing from 25mm - 300mm and warp spacing from 50mm - 300mm. That range suits buyers producing different grid formats for construction, security fencing, aquaculture, and transportation infrastructure.

Use the weft and warp values separately when preparing your specification. A square mesh may use matching spacing in both directions, while a rectangular panel may require different values. Write the required opening in each direction and compare it with the machine range before asking a welded wire mesh machine supplier for a quotation.

Wire diameter is the next limit. The machine accepts 2.8mm - 8.0mm wire. This is a practical fit for production that moves between lighter fencing or flooring mesh and heavier reinforcement mesh. If your products rely on a wire size inside this range, the machine gives you a defined starting point for configuration discussions.

ParameterRange or valueWhy it matters when selecting
Wire diameter2.8mm - 8.0mmSets the wire sizes your mesh orders can use
Weft spacing25mm - 300mmDefines cross-wire opening options
Warp spacing50mm - 300mmDefines longitudinal opening options
Welding width2000mm - 2500mmSets the panel width the line can produce
Welding speed55 - 60 times/minIndicates the stated welding cycle rate
Welding points51 PointsIdentifies the welding-point configuration
Rated voltage380VGives the electrical value for site planning
2

Match the welding width to your finished product

A machine with a welding width of 2000mm - 2500mm fits buyers making mesh panels within that working-width range. Measure the finished panel width used in your orders, then allow your production team to confirm how the mesh will be cut and handled after welding. Width is a purchasing condition because a suitable wire diameter and opening pattern still will not produce the required panel format if the working width is wrong.

The machine uses pre-cut wire for both warp and weft. That matters when your process already prepares straight wires before they reach the welding line. It also gives you a clear material-handling question for the quotation: confirm how your pre-cut wire preparation will connect with feeding, positioning, welding, and cutting.

Our machine is compatible with mild steel, stainless, galvanized, and aluminum. Choose this material configuration when your product range includes one or more of these wire types. The application should guide the choice: construction mesh may require a heavier wire and structural grid, while fencing or poultry flooring may use a different combination of material, opening, and width.

3

Choose control and production features for your order mix

CNC control is useful when you change mesh specifications across orders. The machine uses digital interfaces to adjust mesh size and wire diameter, while parameter presets save and recall multiple mesh specifications. This suits a plant producing several opening patterns or handling small-batch and multi-specification orders.

The system combines wire feeding, positioning, welding, and cutting in one automated production cycle. Its stated welding speed is 55 - 60 times/min, with 51 Points. Buyers should use these values when planning line capacity and comparing the required output with the actual product mix. The figures describe the welding cycle and point configuration, so they should be considered together with the chosen wire size, spacing, width, and material.

CNC-controlled current and pressure are used at the fusion points. Real-time electrical impedance monitoring is included for weld monitoring, and digital feedback supports adjustment of weld current and wire positioning. These functions suit production where consistent grid placement and repeatable welding are important across batches.

The machine is designed for automated operation with 1-2 operators. That arrangement suits a plant replacing manual welding with a centralized production process. It also gives you a staffing point to include in the order discussion, alongside the material feed method and the mesh specifications you expect to run.

4

Check the application before choosing the configuration

Construction reinforcement, security fencing, aquaculture mesh, transportation infrastructure, and poultry flooring are among the stated uses for this industrial machine. The right choice depends on the combination of finished application and mesh specification, not the application name alone.

For reinforcement mesh, begin with the required wire diameter, grid openings, panel width, and material. For security fencing, focus on opening consistency, finished width, and the material type used in your product. Aquaculture and poultry flooring buyers should also define the wire material and opening pattern because those details determine whether the available ranges match the finished mesh.

The machine processes iron, steel, galvanized, and stainless steel wires, while the material compatibility list identifies mild steel, stainless, galvanized, and aluminum. Send the exact material name used in your planned production so we can align the quotation with the correct wire supply and machine configuration.

What to weigh

Wire diameter and mesh opening range
Welding width, wire form, material, and production control

Your shortlist

Industrial welded mesh machine for pre-cut wire mesh production

Questions to settle before requesting a quotation

Can the machine make both square and rectangular mesh?

Yes, the separate weft and warp spacing ranges support different opening values in the two directions. Weft spacing is 25mm - 300mm, while warp spacing is 50mm - 300mm. Give us both dimensions for a rectangular product, or confirm the same value for a square product, so we can check the requested pattern against the machine configuration.

Is the machine suitable for pre-cut wire?

Yes, the wire form is pre-cut wire for both warp and weft. This suits a production process that prepares straight wires before feeding. Include the wire lengths and the handling method used in your current process when you ask for a quotation, so we can discuss the connection between preparation and the machine's feeding, positioning, welding, and cutting cycle.

What electrical value should the installation plan include?

The rated voltage is 380V, and the listed rated power is 125KVAx6 - 160KVAx6. Use these values in the preliminary site discussion with your electrical team. We can then review the planned machine configuration with the wire diameter, mesh width, material, and opening requirements rather than treating the electrical arrangement as a separate purchase decision.

Select the machine around your actual mesh orders

The industrial welded mesh machine suits production that needs 2.8mm - 8.0mm wire, adjustable openings, 2000mm - 2500mm welding width, and pre-cut wire handling. Send your target mesh openings, wire material, finished width, and electrical site value for a quotation matched to your product range.

The company

SHIJIAZHUANG TOPSTAR INTERNATIONAL TRADING CO., LTD.

Shijiazhuang topstar international trading co.,ltd was established in 2024 and is located in Hebei province, China. As a professional foreign - trade company, we are dedicated to global trade, bridging high - quality Chinese manufacturing (Laser welding, laser marking, laser cutting, air compressor and mesh making machine, etc.) with international markets.…

About Us ↗Visit company website ↗
Subscribe to Our Newsletter
Your E-mail Address
Subscribe Now

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.